Siemens Gigaset C450IP - Manual (Page 10)

9
First steps
Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / starting.fm / 24.9.07
Ver
si
on 4, 16.
09.20
05
Follow the steps in the order given below:
1. Connect the base station with the
phone connection
2. Connect the base station with the
mains power supply
3. Connect the base station with the
router
Connecting the base station with the
fixed network and the mains power
supply
¤
Please first connect the phone jack
and then the mains adapter, as shown
below.
1 Phone jack with phone cord
2 Underside of the base station
3 Mains adapter 230 V
Please note:
u Keep the mains adapter plugged in at
all times for operation, as the phone
does not work without mains connec-
tion.
u If you buy a replacement phone cord
from a retailer, ensure that the phone
jack is connected correctly.
You can now use your phone to make calls
via the fixed network and can be reached
at your fixed network number!
Connecting the base station with the
router
For Internet access you need a router,
connected to the Internet via a modem
(if necessary, this can be integrated in the
router).
1 Side view of the base station
2 Network plug (LAN) with network cable
3 Router network plug
As soon as the cable connecting the
phone and router is plugged in, the paging
key lights up on the front of the base
station.
You are now able to establish VoIP
connections within the Gigaset.net
(page 24).
Correct phone jack assignment
1 unused
2 unused
3 a
4 b
5 unused
6 unused
1 3
2
3
2
1
4
5
6
1
2
3
3