beautypg.com

Using several handsets, Registering handsets, Registering another gigaset c45 handset – Siemens Gigaset C450IP User Manual

Page 40: Registering other handsets

background image

39

Using several handsets

Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / T-NetBox_SAG-registration.fm / 24.9.07

Ver

si

on 4, 16.

09.20

05

Using several handsets

Registering handsets

You can register up to six handsets to your

base station.

Registering another Gigaset C45

handset

Before you can use your handset, you

must register it to a base station.
You must initiate handset registration on

the handset and on the base station.
If the handset has been registered suc-

cessfully you will see the display key

§INT§

at

the bottom left of the display. Otherwise

repeat the procedure.
On the handset

Menu§

¢

Settings

¢

Handset

¢

Register

Handset

~

Enter the system PIN of the

base station (the default is

0000) and press

§OK§

. The dis-

play shows e.g.

Registering

and

Base

is flashing.

On the base station
÷

Within 60 secs. press and hold

the registration/paging key on

the base station (page 1)

(min. 1 sec.).

The handset is assigned the lowest unas-

signed internal number (1–6). If several

handsets are registered to the base sta-

tion, the internal number is shown in the

display after registration, e.g.

INT 2

. This

means that the handset has been assigned

the internal number 2.

Registering other handsets

You can register other Gigaset handsets

and handsets for other devices with GAP

functionality as follows.

On the handset

¤

Start to register the handset as

described in its user guide.

On the base station

÷

Press and hold the registra-

tion/paging key on the base

station (page 1) (min. 1 sec.).

Please note:

– If there are several handsets registered to

your base station, you can use one to make

a call via the fixed network and the other to

make a call via the Internet at the same

time.

– As a rule, all calls from a registered GAP

handset are dialled via the connection type

(fixed network or VoIP, see page 46) that

has been set up as

Default Line Type

.

If you want to establish a connection via

the other connection type, enter a "*" (star)

after the phone number. Example:

0498912345671234567*.

Please note:

If six handsets are already registered to the

base station, there are two options:
– The handset with the internal number 6 is

in idle status: the handset you wish to reg-

ister is assigned the number 6. The handset

that was previously number 6 is de-regis-

tered.

– The handset with the internal number 6 is

being used: the handset you wish to regis-

ter cannot be registered.