Siemens Gigaset C450IP - Manual (Page 30)

29
Using the directory and lists
Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / directories_charges.fm / 24.9.07
Ver
si
on 4, 16.
09.20
05
Using the directory and lists
The options are:
u Directory
u Last number redial list
u SMS list
u Calls list
You can save 100 entries in the directory.
You can create a personalised directory for
your own individual handset. However,
you can send the list or individual entries
to other handsets (page 30).
Directory
In the directory you store numbers and
matching names.
¤
With the handset in idle status, open
the directory by pressing the s key.
Length of an entry
Number: max. 32 digits
Name: max. 16 characters
Saving the first number in the
directory
s
¢
Directory empty New Entry?
~ Enter number and press §OK§ .
~ Enter the name and press §OK§ .
Saving a number in the directory
s
¢
§Menu§
¢
New Entry
~ Enter number and press §OK§ .
~ Enter the name and press §OK§ .
Selecting a directory entry
s Open the directory.
You have the following options:
u Use q to scroll to the entry until the
required name is selected.
u Enter the first character of the name, or
scroll to the entry with q.
Dialling with the directory
s
¢
q (select entry; page 29)
c Briefly press/press and hold
the talk key. The number is
dialled using the selected con-
nection type (page 18).
Please note:
– You may also have to enter the phone
number with the area code for local calls
when making VoIP calls to the fixed net-
work (depending on the VoIP provider). You
should therefore always save phone num-
bers in the directory with the area code.
Alternatively, you can also use the Web
configurator to define an area code, which
is automatically prefixed to all numbers
that are dialled without an area code for
calls via VoIP (see Defining dialling plans,
page 64).
– You can assign a number from the directory
to a key for quick dial (page 30).
Please note:
– To find out how to enter IP addresses, turn
to page 18.
– If you enter an asterisk (*) at the end of the
number, the number is dialled via the non-
default connection (page 46), even if you
briefly press the talk key
c
or store this
number on a key for quick dial.
Please note:
You can only dial IP addresses via VoIP.