SATO CT410 - Manual (Page 91)

Journal Print
Command Structure J
Example: See above
Placement: Immediately following A
Default: None
Command Function To print text in a line by line format on a label. By specifying this
command, you automatically select Font XS with a Character
Expansion of 2x2. You also establish a base reference point of
H2,V2. The character pitch is 2 dots and the line gap is 16 dots.
Simply issue an ASCII at the end of each text line.
Input to Printer A
J WITH THE JOURNAL FEATURE
YOU CAN PRINT TEXT WITHOUT
USING ANY FONT COMMANDS
OR POSITION COMMANDS
Q1Z
Printer Output
Special Notes 1. Journal mode assumes a maximum label width . Otherwise, you
may print where there is no label and damage your print head.
2. It is effective only for the current print job.
Section 4. Programming Reference
SATO CT Series Printers 9001069 A Page 4-47