Characters, custom-designed – SATO CT410 User Manual
Page 63
Characters, Custom-Designed
Command Structure
Store Command:
Recall Command:
a
=
1
16x16 matrix
2
24x24 matrix
b
=
Specifies the character encoding method for the data stream
H Hexadecimal characters
B
Binary characters
cc
=
Memory location to store/recall the character. Valid memory
locations are 21 to 52 (counting in Hex) or “!” to “R” in Binary
(data)
=
Data to describe the character
Example:
See Appendix C for a more detailed explanation
Placement:
The Store command is typically sent in its own data
stream to the printer, between the Start/Stop commands.
The Recall command is sent in a secondary data stream
to print the character,and follows any necessary position
or size commands.
Default:
None
Command Function
To allow for the creation, storage, and printing of custom characters,
such as special fonts or logos. Up to 50 individual characters may be
stored in the custom character volatile memory.
Printer Input
See Appendix C for a detailed explanation.
0100038007C00FE01FF03FF87FFCFFFE07C007C007C007C007C007C007C007C0
Section 4. Programming Reference
SATO CT Series Printers
9001069
A
Page 4-19