Form overlay, store – SATO CT410 User Manual
Page 87
Form Overlay, Store
Command Structure
Example:
Placement:
Must be preceded by all other data and placed just before
the Stop command (
Default:
None
Command Function
To store a label image in the volatile form overlay memory. Only one
label image may be stored in this memory area at a time.
Input to Printer
&
Printer Output
There is no output from this command. It stores the label image in the
overlay buffer.
Special Notes
1. Remember that this storage is volatile. Therefore, if the printer
loses power, the overlay must be sent again.
2. The overlay is recalled using the
command.
3. Form overlays do not have to be recompiled each time they are
called to be printed and therefore may result in much faster print
output.
4. The CT printers can only store one format.
Section 4. Programming Reference
SATO CT Series Printers
9001069
A
Page 4-43