SATO CT410 - Manual (Page 79)

Special Notes 1. Characters may be enlarged through the use of the Character
Expansion command.
2. Character spacing may be altered through the use of the Character
Pitch command. The default is 2 dots between characters. It is
recommended to use a spacing of 5 dots for OCR-A and 1 dot for
OCR-B.
3. You may also create custom characters or fonts. See the T
Custom-Designed Characters command.
4. A font must be defined for each field to be printed. There is no
default font.
5. Fonts U, S, M, OA and OB are identical to fonts U, S, M, OA and
OB on the SATO M-8400 printer.
6. The proportionally spaced fonts XU, XS, XM, XL and XA can be
printed with fixed spacing using the PR Fixed Space
command.
7. The matrices for the OA and OB fonts are scaled so that they will
remain a constant size according to the OCR-A and OCR-B
specifications when printed on different resolution printers.
CT400 CT410
OA Font 15 dots W x 22 dots H 22 dots W x 33 dots H
OB Font 20 dots W x 24 dots H 30 dots W x 36 dots H
Section 4. Programming Reference
SATO CT Series Printers 9001069 A Page 4-35