Start/stop label – SATO CT410 User Manual
Page 114
Start/Stop Label
Command Structure
Start Command:
Stop Command:
Example:
See above
Placement:
Default:
None
Command Function
For all print jobs, the Start command must precede the data, and the
Stop command must follow. The print job will not run properly if these
are not in place.
Input to Printer
Printer Output
There is not output for these commands they are not accompanied by
other label printing commands. However, these commands must
precede and follow each print job sent to the printer.
Section 4. Programming Reference
Page 4-70
9001069
A
SATO CT Series Printers
This manual is related to the following products: