SATO CT410 - Manual (Page 10)

GENERAL PRINTER SPECIFICATIONS
SPECIFICATION CT400 CT410
PRINT
Method Direct or Thermal Transfer
Speed (User Selectable) 2 to 6 ips
50 to 150 mm/s
2 to 4 ips
50 to 100 mm/s
Print Module (Dot Size) .0049 in.
.125 mm
.0033 in.
.083 mm
Resolution 203 dpi
8 dpmm
305 dpi
12 dpmm
Maximum Print Width 4.1 in.
104 mm
Maximum Print Length 15.6 in.
400 mm
MEDIA
Minimum Width .90 in. (23 mm)
Minimum Length .60 in. (15 mm)
Maximum Width 4.6 in. (118 mm)
Type Die Cut Labels, Fan-Fold, Tag Stock or Continuous
Caliper 0.003 to .0075 in. (0.08 to 0.19 mm)
Roll OD (max) 4.3 in. (110 mm), Face-Out Wind
Core ID (min) 1.5 in. (40 mm)
SENSING
See-Thru for labels or tags Fixed, 0.25" (6.3 mm) from left label edge
Reflective Eye-Mark Fixed, 0.20" (5 mm) from left label edge
Continuous Form Sensor not used
RIBBON
Maximum Width 4.4 in. (111 mm)
Length 325 ft. (100 m)
Core ID 0.5 in. (12.7 mm)
Thickness 4.5 micron, Face-Out Wind
All specifications subject to change without notice.
Section 1. Printer Overview
Page 1-2 900106 9A SATO CT Series Printers