SATO CT410 User Manual
Page 85
Special Notes
1. Auto-smoothing (when enabled) is only effective if the character
expansion rate is at least (3) times in each direction.
2. Characters may be enlarged through the use of the
Character Expansion command.
3. Character spacing may be altered through the use of the
Character Pitch command.
4. A font must be defined for each field to be printed. There is no
default font.
5. The proportionally spaced fonts XU, XS, XM, XL and XB can be
printed with fixed spacing using the
command.
6. The WB and WL fonts are not available in the initial production CT
printers. Please contact your SATO representative and make
arrangements to have your printer upgraded if these two fonts are
not present.
Section 4. Programming Reference
SATO CT Series Printers
9001069
A
Page 4-41