Schneider Electric 66123 - Manual (Page 91)

Network Management Card & Modbus/Jbus 34022321XT indice :AE Page 91/98
Network Management Teleservice Card
APC by Schneider Electric
www.apc.com
Load short circuit Load OK
Load not powered Load powered
Protection Lost Protection OK
Emergency button ON Emergency button OFF
Fan fault Fan OK
Redundancy Lost Redundancy OK
Low battery Battery OK
UPS communication failed UPS communication restored
UPS data base not available UPS data base OK
UPS on battery UPS on normal AC
UPS internal fault UPS OK
UPS overload UPS returns to normal load
UPS overtemperature UPS temperature OK
UPS running in Power Saving Mode End of Power Saving Mode
Imminent UPS shutoff UPS OK
< Sensor Name> : Temperature is above high threshold (°C)
or (°F)
: Temperature is in normal range
< Sensor Name> : Humidity is above high threshold (%) : Temperature is in normal range
< Sensor Name> : Temperature is below low threshold °C or
(°F)
: Temperature is in normal range
< Sensor Name> : Humidity is below high threshold (%) : Temperature is in normal range
:
:
:
: >