Schneider Electric 66123 - Manual (Page 10)

Network Management Card & Modbus/Jbus 34022321XT indice :AE Page 10/98
Network Management Teleservice Card
APC by Schneider Electric
www.apc.com
2.4 Administration
Up to 35 workstations protected by Network Shutdown Modules - Central or local configuration.
Up to 5 browsers connected at the same time (3 in SSL).
•
Minimum recommended browser versions: Internet Explorer 6.x / 7.0, Mozilla Firefox 1.5 / 2.0 / 3.0
E-mail sending configurable according to UPS alarms and transmission of a periodical report.
Protection by encrypted password.
Protection by secure SSL connection.
Saving of logs in the non-volatile memory.
Languages available:
INMC 66123 : English / French / Spanish / German / Italian
NMTC 66124 : English
On-line help in English available for each page.
Card firmware updated via the network
2.5 Network
Fast ETHERNET 10/100 Mbits compatibility with auto-negotiation on the RJ45 outlet.
The used ports are:
BootP DHCP UDP 68 , 67
HTML TCP 80
SSL TCP 443
NSM in connected mode TCP 5000
SMTP 25
SNMP V1 161
TRAP SNMP 162
2.6 Environment sensor
Temperature measurement from 0 to 70°C with +/- 1°C accuracy
Measurement of humidity from 0 to 100% with +/- 6% accuracy
Min / max time-stamped function for temperature and humidity
Choice of temperature readings in Celsius or Fahrenheit
High and low thresholds, hysteresis and offset adjustable via Web interface
Possibility of notification of status changes by e-mail, SMS or SNMP trap
Position detection of 2 dry contacts (maximum sensor/contact distance: 20 m)
Name and status of each configurable contact
Recording of events and measurements in the card log
Possibility of shutting down the installation in the event of a threshold being exceeded or on opening / closure of a dry contact
Connection to the card with straight CAT5 RJ45 network cables (maximum card/sensor distance: 20 m)
Hot installation
2.7 MIB (Management Information Base)
Compatible with MIB MGE V1.8 adapted for Galaxy 7000.
The list of objects managed can be found in the chapter 8.2.