Schneider Electric 66123 - Manual (Page 8)

Network Management Card & Modbus/Jbus 34022321XT indice :AE Page 8/98
Network Management Teleservice Card
APC by Schneider Electric
www.apc.com
1.4 Direct sending of E-mail
When a UPS event occurs, the Network Management Card can directly notify up to 4 intranet or extranet addresses by e-mail (see E-mail
Notification and E-mail message settings)
1.5 Sending text messages (SMS)
The card offers the possibility of redirecting UPS alarms to an e-mail server. The format of these e-mails is compatible with mobile telephone e-
mail/SMS transfer systems proposed by ISPs. The format to be used depends on the service provider. For example, sms.0660256585@votre-
login.activmail.net (text messages).
1.6 Compatibility with the Network Management Systems (NMS) – Trap sending
The Network Management Cards are compatible with the major Network Management Systems (IBM Tivoli, CA Unicenter, HP Insight
Manager). The Management-Pac 2 offering includes the necessary SNMP plug-ins to allow an easy integration in the NMS. Events are
notified by SNMP trap.
1.7 Environment Sensor (option)
The Environment Sensor (66846) solution comprises a box to be connected to the Card Settings port of the Network Management Cards.
Environment Sensor enables measurement of temperature and humidity around the UPS, consideration of external alarms via 2 dry contacts
and notification of alarms according to pre-programmed thresholds. (see Environmen Status and Environment Configuration)
1.8 Modbus/Jbus for INMC 66123
The Modbus/Jbus hexadecimal (MODBUS RTU) communication protocol is used in slave mode. The system provides a communication channel
with an RS485 or RS232 interface.
1.9 Teleservice for NMTC 66124
The Teleservice card allow the UPS Remote Monitoring feature from the APC by Schneider TLS Center.
This feature manages remotely UPS alarms, UPS diagnostic, UPS Monitroing and Monthly Reporting.