Schneider Electric 66123 - Manual (Page 90)

Network Management Card & Modbus/Jbus 34022321XT indice :AE Page 90/98
Network Management Teleservice Card
APC by Schneider Electric
www.apc.com
11 Appendices
11.1 Tables of alarms and events
11.1.1 Table of alarms and UPS events
List of time dated alarms
Alarm on
Alarm off
No Battery Battery present
Battery temperature fault Battery temperature OK
Battery charger fault Battery charger OK
Battery fault Battery OK
End of Warranty
Contact MGE http://www.mgeups.com/lcm
LCM message OK
End of battery life
Contacter MGE http://www.mgeups.com/lcm
LCM message OK
End of life of the wearing parts
Contacter MGE http://www.mgeups.com/lcm
LCM message OK
Rectifier fault Rectifier OK
Chopper fault Chopper OK
Normal AC frequency out of tolerance Normal AC frequency OK
Normal AC fuses blown Normal AC fuses OK
Normal AC module fault Normal AC module OK
Normal AC voltage out of tolerance Normal AC voltage OK
Normal AC NOK Normal AC OK
Site wiring fault Site wiring OK
Bypass AC frequency out of tolerance Bypass AC frequency OK
Bypass AC phase out of tolerance Bypass AC phase OK
Bypass AC voltage out of tolerance Bypass AC voltage OK
Automatic Bypass fault Automatic Bypass OK
Automatic Bypass overload Automatic Bypass load OK
Automatic Bypass overtemperature Automatic Bypass temperature OK
Automatic Bypass thermal overload Automatic Bypass load OK
Automatic Bypass switch (Q4S) open Automatic Bypass switch (Q4S) closed
Normal AC switch (Q1) open Normal AC switch (Q1) closed
Battery switch (QF1) open Battery switch (QF1) closed
Manual Bypass switch (Q3BP) closed Manual Bypass switch (Q3BP) open
UPS on manual bypass
Output switch (Q5N) open Output switch (Q5N) closed
Single wave load fault Load OK
Inverter limitation Inverter end of limitation
Inverter fuses blown Input fuses OK
Inverter fault Inverter OK
Inverter overload Inverter load OK
Inverter thermal overload Inverter load OK
Load not protected - On Automatic Bypass Load protected - Return from Bypass