Sharp SCH-R850 - Manual (Page 123)

Changing Your Settings 120
– Incoming — Lets you Allow All incoming Picture and Video messages
or Allow
None (No incoming Picture and Video messages).
– Outgoing — Lets you Allow All outgoing Picture and Video messages
or Allow
None (No outgoing Picture and Video messages).
• IP Connection — Lets you Allow All data connections or Allow
None (No data connections).
2. Select the desired Restriction setting(s).
NAM Selection
The Network menu allows you to select NAM (Number
Assignment Module) settings for your phone. You can store two
NAM settings, which are essentially telephone numbers, for your
phone.
1. From the Settings menu, select Phone Settings ➔ NAM
Selection. The following options appear in the display:
• NAM1 — Your service contract has one phone line.
• NAM2 — Your service contract has two phone lines.
2. Select the desired NAM setting. The phone powers itself
off and back on.
System Select
The System Select menu allows you to select the roaming setting
for your phone.
1. From the Settings menu, select Phone Settings ➔ System
Select.
The following roaming options appear in the display:
• Home only — Your phone is available for normal operation only
within your designated coverage area.
• Automatic — Your Wireless Provider’s Preferred Roaming List
(PRL) of networks is used to acquire service. If no preferred
networks are found, any digital system is acquired.
2. Select the preferred roaming option, then press the OK soft
key.
Set Time
Use the Set Time option to set the current date and time.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
With Airplane Mode set to On, this function is enabled. In digital service
mode, setting Airplane Mode to Off also disables Set Time. (For more
information, refer to “Airplane Mode” on page 116.)
1. From the Settings menu, select Phone Settings ➔ Set Time.
The following options appear in the display:
• Set Date
• Set Time
2. Select the desired option.
• For Set Date, the Set Date screen appears in the display.
– Use the up and down arrow buttons to select the current date.