Siemens Simotion A4027118-A0414 - Manual (Page 89)

Section D: Program description
Description of important program elements
Flying Saw with SIMOTION A4027118-A0414
V 1.4 Release 06/06/08 89/107
C
opyr
ight
©
Si
em
ens
AG 2
0
08
Al
l r
ights r
e
s
e
rv
ed
M
anual_
S
IM
OTION Fl
ying Saw
_
V1
.4.
d
oc
• Sequence phases when changing from the “disable” to “manual”
• Sequence phases when changing from the “starting position” to
“disable”
• Sequence phases when changing from the “starting position” to “error”
• Sequence phases when changing from the “starting position” to
“automatic”
• Sequence phases when changing from the “automatic” to “disable”
• Sequence phases when changing from the “automatic” to “starting
position”
• Sequence phases when changing from the “manual” to “disable”
• Sequence phases in "automatic" operation.
• Maximum length of the SyncPos buffer
Static variables
• Description of the data structure of the TO parameters
• Description of the data structure of the user interface with the geometry,
machine data and control bits
• Description of the data structure of the error interface with the error IDs
of the state change and the RetDINT and FR values of the system
commands.
• Description of the data structure of the internal data area of the
FlyingSaw FBs. Under no circumstances may users change these
values.
• Description of the data structure to manage synchronous positions.
• Description of the data structure for time calculations within the
FlyingSaw FBs
• Description of the data structure of the synchronous position detection
using measuring function.
10.3 Functions of the FB_BGD_Template_FlyingSaw()
("FlyingSaw-FB")
10.3.1 Declarations
• Input
interface
• Input/output
interface
• Output
interface
• Internal program data