Siemens Simotion A4027118-A0414 - Manual (Page 6)

Foreword
SIMOTION Flying Saw A4027118-A0414
V 1.4 Release 06/06/08 6/107
C
opyr
ight
©
Si
em
ens
AG 2
0
08
Al
l r
ights r
e
s
e
rv
ed
M
anual_
S
IM
OTION Fl
ying Saw
_
V1
.4.
d
oc
Document structure
The documentation of this application is sub-divided into the following main
section:
Sec-
tion
Description Note
A Section A will provide you with everything that
you require to obtain an overview of this
standard application. This Section explains the
prerequisites and the objective when using this
application.
Some of the uses of this standard application are
explained as well as situations where this
application cannot be used.
B Section B is interesting if you wish to use this
standard application for demonstration purposes.
Here, you are provided with information about
how you can download this application from your
PC/PG to the demonstration case step-by-step
and how it then used.
C Section C provides you with all of the necessary
steps to integrate the core functions of the
standard application into your user project.
Preparations and parameterizing operations are
also explained. Further, you are also told how to
integrate the core functions into your application
step-by-step.
In addition, tips are provided on how to use the
core functions.
D Section D is interesting if you wish to
expand/adapt the functionality of the core
functions provided for your particular application.
E Section E “Appendix” provides you with detailed
information including a detailed fault/error
description, a description of a test program for
the core standard application functions as well as
references. A feedback sheet is also provided
which you can use to give us your comments
and suggestions on this document.