JVC VR-509E - Manual (Page 55)

55
Useful Features
1. Press the [MENU] button.
• The [MENU]
→ [OPERATION MENU] →
[MAINTENANCE]
→ [MAINTENANCE/LOG] screens will
be displayed in this sequence in accordance with the
[MENU Screen Operations] explained on page 17.
• The TOTAL TIME and POWER FAIL TIME LIST will be
displayed.
• The oldest log and the most recent three logs will be
displayed for the POWER FAIL TIME LIST.
2. Select the POWER FAIL TIME LIST with the [ S/T]
keys, and then press [CANCEL].
• All list will be deleted.
3. Select your desired item with the [ S/T] keys, and then
press [SET].
Settings
Displays the operation log.
Displays the recording log.
1. Press the [MENU] button.
• The [MENU]
→ [OPERATION MENU] →
[MAINTENANCE]
→ [MAINTENANCE/LOG] screens will
be displayed in this sequence in accordance with the
[MENU Screen Operations] explained on page 17.
2. Select [REBOOT] with the [ S/T] keys, and then press
[SET].
• The confirmation screen will be displayed.
* [REBOOT] cannot be executed during timer recording.
3. Select [YES] and press the [SET] button.
• The system will be rebooted.
• The VR-509 is equipped with a function to notify the user of
abnormalities on the hard disk when it is automatically
rebooted.
• The automatic shut-off process will be executed if the
system fails to recognize the hard disk or malfunctions
occur three times during automatic rebooting.
• When there is a failure on the hard disk, it will restart and
recovery automatically. The [E-01] error code will be
displayed on the monitor screen after the automatic
rebooting procedure has been carried out.
• Normal operations will be resumed when the automatic
rebooting procedure has restored the malfunction. In this
event, a message stating “SYSTEM REBOOTED TO
CHECK HARD DISK” will be displayed on the monitor
screen.
• Recording is not possible when the rebooting procedure is
in progress.
• Automatic recovery is impossible in the case of fatal
malfunctions that prevent the rebooting procedure from
running.
Displaying the Power Fail Time List and
Log
Deleting the Power Fail List
Displaying the Operation Log and Recording
Log
OPERATION LOG
RECORD LOG
MAINTENANCE/LOG
TOTAL TIME
POWER FAIL TIME LIST
PL - ****
PL - ****
PL - ****
PL - ****
REBOOT
OPERATION LOG
RECORD LOG
DOWNLOAD SETTING
UPLOAD SETTING
********** h
**/**/20**
**/**/20**
**/**/20**
**/**/20**
** : **
** : **
** : **
** : **
EXEC
EXEC
EXEC
EXEC
EXEC
2.
3.
There are cases where images recorded close to the times
of power failures will not playback normally.
CAUTION
Rebooting the System
Hard Disk Recovery Feature
MAINTENANCE/LOG
TOTAL TIME
POWER FAIL TIME LIST
PL - ****
PL - ****
PL - ****
PL - ****
REBOOT
OPERATION LOG
RECORD LOG
DOWNLOAD SETTING
UPLOAD SETTING
********** h
** : **
** : **
** : **
** : **
EXEC
EXEC
EXEC
EXEC
EXEC 2.
**/**/20**
**/**/20**
**/**/20**
**/**/20**