Setting up the record setup – JVC VR-509E User Manual
Page 30
Recording Camera Images
30
1. Press the [MENU] button.
• Opens the menus in accordance with the instructions
provided in MENU Screen Operations (page 17) in the
sequence of [MENU]
→ [RECORD SETUP].
2. Select your desired item with [
S/T], and then change
the setting with [–/+].
Settings
OFF:
No audio signals recorded.
ON:
Audio signals recorded.
* Audio sound will not be recorded when the frame
rate per second is set at 0.08 or 0.2. (See page 31)
OFF:
No audio signals recorded.
ON:
Audio signals recorded.
Sets the recording time when the EMERGENCY REC terminal
is input. The recording resolution is set at H (high-resolution
recording).
OFF:
Not record.
30SEC, 1 MIN, 5 MIN, 10 MIN, 20 MIN:
records in the set duration.
CONTINUE: Continue recording until the user press the
[ALARM RESET] button.
MANUAL:
Continues recording while the signal is being
input.
Sets whether recording is to be carried out or not when an
illegal passcode has been detected. Recording will be started
with the same settings as [EMERGENCY] recording. The
recording time is set with this function.
However, it is not possible to forcibly stop recording by pressing
the [ALARM RESET] button.
OFF:
Recording not started when the wrong passcode is
entered.
10 SEC, 20 SEC, 30 SEC:
Starts recording only to the period of time set when the
wrong passcode is entered.
PROGRAM TIMER:
Records according to weekly program timer and daily
program timer.
REC PATTERN 1-9:
Records according to the respective REC PATTERN
setting.
The tampering detection signal will be recorded on the image.
OFF:
The WATER MARK function is deactivated.
ON:
The WATER MARK function is activated.
* Special replay software is required for the tampering
detection function.
Setting up the RECORD SETUP
NORMAL AUDIO REC
ALARM AUDIO REC
EMERGENCY REC DURATION
RECORD SETUP
DATE TIMER ..
OFF
ALARM REC ..
PROGRAM TIMER
WEEKLY TIMER ..
WATER MARK
TIMER/MODE(REC PATTERN)
OFF
NORMAL AUDIO REC
ALARM AUDIO REC
OFF
ALARM TERMINAL ..
REC PATTERN SET ..
OFF
EMERGENCY REC DURATION
OFF
PASSCODE ERROR REC
2.
The number of recording frames for emergency recording
(passcode error recording) is the total frame count (120
frames when the PRIORITY mode is [SMOOTH] and 60
frames when it is [HIGH-RESOLUTION]) divided equally
into the number of camera inputs selected with emergency
recording.
MEMO
PASSCODE ERROR REC
TIMER/MODE (REC PATTERN)
WATER MARK