Vis-cam system – JAI VIS-CAM System TS-1327EN User Manual
Page 72
VIS-CAM System
60
Appendix A: Camera Functional & Connector Description
5.6.4 Connector physical Interface
Ethernet test connections.
Pin Signal
Description
Connection to
Remarks
1 A+
(wh/org)
Ethernet
A+
Gigabit switch
Connected when testing
2 A-
(org)
Ethernet
A-
Gigabit switch
Connected when testing
3
B+ (wht/grn)
Ethernet B+
Gigabit switch
Connected when testing
4
Nu (wht/blu)
Not used
—
—
5
Nu (blu)
Not used
—
—
6
B- (grn)
Ethernet B-
Gigabit switch
Connected when testing
7
Nu (wht/brn)
Not used
—
—
8
Nu (brn)
Not used
—
—
5.6.5 Test setup 1
The test setup for communication with the EN Camera and the network is shown in Figure 60. The
patch cables can be twisted or not twisted.
Figure 60. EN network test configuration setup.
The test setup does not work properly with a gigabit ethernet switch.