MACKIE Digital 8Bus D8B v5.1 - Manual (Page 183)

D8B Manual • Appendices • page 177
D8B
Button
Number D8B Button Mapped HUI Button
Global
Mode
General HUI Layer
Comments Soundscape Function
35
Automation
Mutes Auto Enable Mute N
36
Automation Auto
Touch
Auto Mode Touch N
37 Automation Pan Auto Enable Pan N
38
Automation Trim
Levels
Auto Mode Trim N
39 Set Time Equals (=) Y
Won’t work with snap-
shot button pressed
Won’t work with snap-
shot button pressed
Won’t work with snap-
shot button pressed
Won’t work with snap-
shot button pressed
Toggles D8B snap-
shot recall mode.
40 SMPTE View F8/Esc Y
41 D8B Keypad HUI/D8B key pad Y/N
The key pad works
with D8B with snap-
shot button pressed
The Enter key works
with D8B with snap-
shot button pressed
The Store key works
with D8B with snap-
shot button pressed
42 Enter Enter Y/N
43 Loop Loop Y
44 Store In Y
Alt + Store Out Y
45 Locator Decimal (.) Y
Snapshot N/A Y
46 Rewind Rewind Y
Alt + Rewind RTZ
47 Fast Fwd Fast Forward Y
Alt + Fast Fwd End
48 Stop Stop Y
49 Play Play Y
50 Record Record Y
51 Jog & Shuttle Jog/Shuttle Select Y
52 Jog Wheel Jog Wheel Y
Other HUI Mode/HUI Layer Notes:
Channel HUI VFD Mode: HUI Layer VFD displays eight channel names in bottom line of VFD. First two VFD select buttons mirror the Channel L and Channel R functions. The name of the selected
channel/function is displayed in the center of the top VFD line. The Online status is also displayed at the end of this line.
Normal HUI VFD Mode: HUI Layer VFD displays the normal HUI VFD screen exactly as a real HUI would. The contents of the VFD depend on the DAW in use and other settings. See notes on the VFD above.
Global Mode: Global functions are always active when HUI Mode is on, no matter what D8B bank is active. Non-global functions are active only when HUI Mode is On and the D8B is displaying the HUI Layer.
N/A
N/A
N/A
N/A
N/A
N/A
Press to set the current play locator, then type in the new time on the D8B numeric keypad and press Enter
to locate to the newly entered time.
Corresponds to PC numeric keypad
Toggle Loop button
Toggle Auto Punch In button
Toggle Auto Punch Out button
N/A
Press to enter D8B snapshot mode. Type a snapshot number and press Enter to recall a snapshot. Press Store,
type a number, and press Enter to store a snapshot. Exit snapshot mode by pressing Snapshot or Enter.
Rewind
Go to L locator
Fast Forward
Go to R locator
Stop. Press again to return to L Locator. Press again to return to beginning.
Play. Also punches out of recording.
Start Recording. Press during playback to punch into record; press again to punch out.
N/A
Jog
53 Cut/Zero Set Cut N N/A
54 Copy Copy N N/A
55 Paste Paste N N/A
56 Undo Undo N N/A
D8B v5.1 B445 HUI Layer Control Mapping
For Soundscape