MACKIE Digital 8Bus D8B v5.1 - Manual (Page 129)

D8B Manual • Chapter 4 • page 123
Console Settings
1. If you have DIO • 8 cards installed, set
the Tape Input and Tape Output
format for each card to ADAT. OPT
• 8
cards need no configuration.
2. If the D8B is the clock master, set the
Sample Rate to either 44.1kHz or
48kHz , and set the Apogee Clock to
Internal (in the Digital I/O Setup
window). If it is a clock slave, then set
the Apogee Clock to Word Clock. Set
the Sample Rate to match the Sample
Rate
selected on the HDR24/96.
ADAT Optical In
ADAT Optical Out
Digital•8 Bus
OPT•8 Cards
HDR 24/96
OPT•8 Cards
ADAT Optical In
ADAT Optical Out
ADAT Optical Hookup with OPT • 8
APOGEE
SYNC
APOGEE
Word Clock Out
Word Clock
In
Word
Clock Out
(HDR24/96
as Master)
Word
Clock Out
(D8B as
Master)
Word
Clock In
Word
Clock Out
Apogee
Clock I/O
Card
S C
NOT
WARNING
HDR
Sync
Card
Word
Clock In
Word
Clock Out
Use
one
only
Depress the
Termination
button if the
HDR24/96 is set
to Slave