MACKIE Digital 8Bus D8B v5.1 - Manual (Page 175)

D8B Manual • Appendices • page 169
D8B
Button
Number D8B Button Mapped HUI Button
Global
Mode
General HUI Layer
Comments Pro Tools Function
35
Automation
Mutes
Auto Enable Mute N Auto Arms Mute in PT Auto Enable Window
36
Automation Auto
Touch Auto Mode Touch N Hold and press a channel Write (HUI Auto) button to put the PT channel into Auto Touch Mode
37 Automation Pan Auto Enable Pan N Auto Arms Pan and Send Pan in PT Auto Enable Window
38
Automation Trim
Levels Auto Mode Trim N Hold and press a channel Write (HUI Auto) button to put the PT channel into Auto Trim Mode
39 Set Time Equals (=) Y
Won’t work with snap-
shot button pressed
Won’t work with snap-
shot button pressed
Won’t work with snap-
shot button pressed
Won’t work with snap-
shot button pressed
Toggles D8B snap-
shot recall mode.
When PT Numeric Keypad mode is Classic, press to set focus on PT main time window.
Then press D8B number pad to enter in new time from right to left. Press to make PT locate to time entered.
40 SMPTE View F8/Esc Y Cancel open dialog windows
41 D8B Keypad HUI/D8B key pad Y/N
The key pad works
with D8B with snap-
shot button pressed
The Enter key works
with D8B with snap-
shot button pressed
The Store key works
with D8B with snap-
shot button pressed
42 Enter Enter Y/N OK any on-screen dialogs. Open Create New Memory Location dialog.
43 Loop Loop Y Toggle PT loop playback
44 Store In Y Create an In point in the edit window. Can be used during playback.
Alt + Store Out Y Create an out point in the edit window. Can be used during playback.
45 Locator Decimal (.) Y
When PT Numeric Keypad mode is Classic, can be used to recall PT locate points by typing the locate point on the D8B keypad
and then pressing Locator (.).
Snapshot N/A Y
Press to enter D8B snapshot mode. Type a snapshot number and press Enter to recall a snapshot. Press Store, type a number,
and press Enter to store a snapshot. Exit snapshot mode by pressing Snapshot or Enter.
46 Rewind Rewind Y Rewind PT transport. Return PT locator to beginning of Session.
Alt + Rewind RTZ
47 Fast Fwd Fast Forward Y Fast Forward PT Transport Advance PT Transport to end of session
Alt + Fast Fwd End
48 Stop Stop Y Stop PT playback
49 Play Play Y Start PT playback
50 Record Record Y Press Record and play to start PT recording. If Quick Punch is enabled in PT, press Record to punch in during playback.
51 Jog & Shuttle Jog/Shuttle Select Y Press once to go into jog, press again to go into shuttle, and press again to go back to normal.
52 Jog Wheel Jog Wheel Y Turn wheel to either Jog or Shuttle
53 Cut/Zero Set Cut N Cut selection/region
54 Copy Copy N Copy selection/region
55 Paste Paste N Paste contents of clipboard
56 Undo Undo N Undoes last command in PT
Other HUI Mode/HUI Layer Notes:
Channel HUI VFD Mode: HUI Layer VFD displays eight channel names in bottom line of VFD. First two VFD select buttons mirror the Channel L and Channel R functions. The name of the selected
channel/function is displayed in the center of the top VFD line. The Online status is also displayed at the end of this line.
Normal HUI VFD Mode: HUI Layer VFD displays the normal HUI VFD screen exactly as a real HUI would. The contents of the VFD depend on the DAW in use and other settings. See notes on the VFD above.
Global Mode: Global functions are always active when HUI Mode is on, no matter what D8B bank is active. Non-global functions are active only when HUI Mode is On and the D8B is displaying the HUI Layer.
D8B v5.1 B445 HUI Layer Control Mapping
For Pro Tools