Matsushita CF-19FHGAX - Manual (Page 50)

14. Fix the DU PCB and the Plate using the 2 screws .
15. Fix the DU PCB Ass'y and Antenna PCB using the 3
screws and the 2 screws .
16. Connect the white, black and gray Cables.
17. Turn the computer over, open the Display Unit, and then
connect the 2 LCD Cables. (CN8,CN17)
Note:
Tighten the Screws in the numbered order (No1 to No7).
Screws : DFHE5108ZA
Screws : DRSB2+10FKL
Screws : DRSB2+5FKL
Screws : XSB2+3FNL
Plate
Antenna PCB
DU PCB
gray cable black cable white cable
Connector(CN8)
Connector(CN17)