Line processing of antenna cable and lcd cable, Safety working caution – Matsushita CF-19FHGAX User Manual
Page 39
■ Line Processing of Antenna Cable and LCD Cable
Insert
the cables into the Cable Holder as shown in figure.
of the Antenna Cables
Right
side of LCD Cable:White/Gray
Left
side of LCD Cable:Blue/Black/Brown
Install
the Holder and Cable guide on the Hinge as shown in figure.
Step1
Step2
Cable
Guide HInge
Cable
Holder
Cable
Holder
S1:Insulation
S2:Pinching Cables S3:Sharp Edge
S4:Part
No. Check S5:Others
Safety
Working
CAUTION
Step3
Step6
OK
NG
S2
S5
CAUTION:Check
the position of the Cables
Step4
Step5
S5
Keep
margin in cable length
Fit
Holders as shown in figure
(Until
you hear the click)
Red
marking is
on
the holder
Black
marking is
on
the holder
Watch
out is the cable comes off from the holder
for
cable is not scissored between the holder and hinge.
Next,
wrap (one round) the LCD Cable around
the axis of the Hinge as shown in figure.
It
prevents to break of the cable
LCD
cable proccess space
ANT
cable proccess space
Wrap
(one round) only the Antenna Cables around
the axis of the Hinge as shown in figure.
Note:
Handle LCD cable as show in figure. LCD cable
must
not intersect with Antenna Cables.
It
prevents to
break
of the
cable
The
antenna cables must not intersect with the LCD cable.