4 detailed description of the signals, 1 position control mode, Signals and wiring – MITSUBISHI ELECTRIC MR-J2S- A User Manual
Page 71
3 - 24
3. SIGNALS AND WIRING
3.4 Detailed description of the signals
3.4.1 Position control mode
(1) Pulse train input
(a) Input pulse waveform selection
Command pulses may be input in any of three different forms, for which positive or negative logic
can be chosen. Set the command pulse train form in parameter No. 21.
Arrow
or
in the table indicates the timing of importing a pulse train.
A B-phase pulse trains are imported after they have been multiplied by 4.
Pulse train form
Forward rotation
command
Reverse rotation
command
Parameter No. 21
(Command pulse train)
Forward rotation
pulse train
Reverse rotation
pulse train
PP
NP
0010
Pulse train sign
PP
NP
L
H
0011
N
egative
lo
gic
A-phase pulse train
B-phase pulse train
PP
NP
0012
Forward rotation
pulse train
Reverse rotation
pulse train
PP
NP
0000
Pulse train sign
PP
NP
H
L
0001
Po
siti
ve
lo
gic
A-phase pulse train
B-phase pulse train
PP
NP
0002