Removal procedure – Motorola ATCA-717 User Manual
Page 56
Installation
Blade Installation
56
PENT/ATCA−717
7.
Tighten the face plate screws which secure the blade to the shelf.
a
8.
Connect cables to the face plate, if applicable
Removal Procedure
1.
Remove face plate cables, if applicable
aa
2.
Unfasten the screws of the face plate until the blade is detached from the shelf
3.
Open the lower and the upper handle by pressing the two handle components
together and turning the handles outward
4.
Remove the blade from the shelf