Motorola ATCA-717 User Manual
Page 17
PENT/ATCA−717
17
Order No.
a
Description
Date
Rev.
6806800A15A
April 2006
Created separate manual for blade
used in AXP systems; Changed
parallel ATA connector pinout;
modified description of on−board
switches SW4−1, SW4−2 and SW4−4
(default settings were changed);
updated description of Ethernet
switch configuration (new routing);
updated PMC Pn4 pinout
description; extended description of
face plate LEDs; updated
description of P23 backplane
connector pinout; added section:
BIOS−>Crisis Recovery Mode;
updated on−board switch
description: crisis recovery switch
no more reserved;changed location
of two temperature sensors and
adapted list of IPMI sensors;
removed references to full mesh
routing: no longer an available
option; in blade installation:
removed warning regarding plastic
handles (new handles are used
now); updated ordering information