Motorola ATCA-717 - Manual (Page 123)

Intelligent Platform Management Controller Devices’ Features and Data Paths
PENT/ATCA−717 123
Sensor Name Availability Sensor Type What Does It Measure? Type of
Measurement
715 FPGA Version Version FPGA version of ATCA−715 Discrete Always
after
payload has
first been
powered
ON
FW Revision ISC0 Revision Revision of the Intelligent Slave
Controller 0 (ISC0) firmware Discrete Always
FW Revision ISC1 Revision Revision of the Intelligent Slave
Controller 1 (ISC1) firmware Discrete Always
715 IPMC Status IPMC status Discrete Always
SYS FW
PROGRESS Status BIOS boot progress Discrete While
Payload
powered
ON
Boot Error Status BOOT error Discrete While
Payload
powered
ON
Supply Current Current 12V payload current Analog While
payload
powered
ON
12V DCDC Temp Temperature Temperature at 12V DC/DC converter Analog While
payload
powered
ON
For further details refer to the "PENT/ATCA−715/717/7105/7107 Control via IPMI
Programmer’s Guide" which can be downloaded from the Motorola literature catalog.
I2C Addresses
The blade provides one IDROM which is attached to the IPMC via an I2C bus. The I2C
address of the IDROM is 0xA0.
a