Motorola ATCA-717 - Manual (Page 29)

About this Manual Introduction
PENT/ATCA−717 29
About this Manual
This Reference Guide provides the information you need to install, access and operate the
blade.
a
Organization of this Manual
The Reference Guide is organized as follows. a
Table 1: Organization of this Manual
Chapter Description
Using this Guide Lists all conventions and abbreviations used in this manual and
outlines the revision history
Other Sources of Information Lists related documentation and specifications
Safety Notes Provides safety relevant information when handling the product
Sicherheitshinweise German translation of the Safety Notes section
Introduction Provides a basic overview of the features of the product and this
manual
Installation Outlines the installation requirements, hardware accessories,
switch settings, installation and removal procedures
Controls, Indicators and
Connectors Describes the LEDs, keys, and connectors of the product
BIOS Describes the basic features of the blade’s BIOS. Also explains how
to restore the BIOS default settings and how to connect to the blade
using the serial console redirect feature.
a
Devices’ Features and Data Paths Provides detailled information on the devices, such as controllers,
CPU etc., used on the blade and how they are interconnected
Maps and Registers Provides information that is relevant for programmers, such as
register reference and memory maps
a
Battery Exchange Describes how to exchange the blade’s on−board battery
Feedback
Motorola welcomes and appreciates your comments on its documentation. We want to
know what you think about our manuals and how we can make them better. Mail
comments to:
S Motorola GmbH
ECC Embedded Communication Computing
Lilienthalstr. 15
85579 Neubiberg−Munich/Germany