Standard compliances – Motorola ATCA-717 User Manual
Page 32
Introduction
Standard Compliances
32
PENT/ATCA−717
Standard Compliances
Standard
Description
UL 60950−1
EN 60950−1
IEC 60950−1
CAN/CSA C22.2 No 60950−1
Legal safety requirements
EN 55022
EN 55024
EN 300386
FCC Part 15
a
EMC requirements on system level (predefined
Motorola system)
ANSI/IPC−A610 Rev.C Class 2
ANSI/IPC−7711
ANSI/IPC−7721
ANSI−J−001...003
Manufacturing Requirements
ISO 8601
Y2K compliance
NEBS Standard GR−63−CORE,
NEBS Standard GR−1089 CORE
NEBS level three
Product is designed to support NEBS level three.
The compliance tests must be done with the
customer target system.
PICMG 3.0 R1.0
Defines mechanics, blade dimensions, power
distribution, power and data connectors, and
system management
Note:
a
This blade contains an embedded power source rated >150W. To achieve NEBS
compliance on system level, Shelf Ground (chassis ground) and Logic Ground (logic
signal return) have to be connected. The connection may be implemented inside the
shelf, e.g. at the backplane, or the shelf has to provide a possibility to lead Logic
Ground out of the shelf for external connection to Central Office Ground. For further
information refer to Telcordia GR−1089−CORE, section 9.8.2, requirement R9−14.
a