Multi-Tech Systems MTASR1-100 - Manual (Page 28)

MTASR1-100 Owner’s Manual
28
3.1 Introduction
This chapter is organized in the way you will unpack and cable your RouteFinder 100 . The unpacking section
describes the contents of the shipping box and shows how the RouteFinder 100 is packaged. The installation
procedure describes each cable connection and shows where that cable is connected to the RouteFinder 100 .
3.2 Unpacking
The shipping box contains the RouteFinder 100 , external power supply, a plastic bag containing cables, your
owner's manual, and the software diskette. Inspect the contents for signs of any shipping damage. If damage
is observed, do not power up the unit, contact Multi-Tech's Technical Support for advice (refer to Chapter 9).
If no damage is observed, place the RouteFinder
100 in its final location and perform the Installation Procedure
in Table 3-1.
Save the shipping box in case a return shipment is necessary.
Figure 3-1. Unpacking