Multi-Tech Systems MTASR1-100 - Manual (Page 173)

Chapter 9 - Dial Out Client Software
173
5. Select the MCSI command line parameter options necessary for the client PC on which it will be run.
Then type MCSIWSN followed by the selected parameter string.
6. After MCSIWSN has been started with its desired parameter string, and the “MCSI is Resident” message
appears, LOGON to the RNS.
7. Type LOGON and press Enter. The following appears:
8. Type USER1 or another valid user name and press Enter. If a password was assigned, the following
appears: (If a password was not assigned, go on to Step 10.)
9. Type USER1 or the valid password for the user name entered and press Enter. The following appears:
10. You have now connected to the MultiRouter modem and can run any MCSI compatible software to
establish a connection.