GE GFK-2489 - Manual (Page 41)

3-8 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489
3
Starting a Web Browser Session
This method requires that you know the IP address of the radio you are connecting to. If you
do not know the address, start a Local Console session (see Starting a Local Console
Session
(recommended for first-time users) and access the Starting Information Screen . The
IP address is displayed on this screen.
1. Connect a PC to the LAN port on the radio, either directly or via a network. If connecting
directly, use an Ethernet crossover cable; if connecting via a network, use a straight-
through cable. The LAN LED lights to indicate an active connection.
2. Open a Web browser on your computer (Internet Explorer, Netscape Navigator, etc.).
3. Enter the radio IP address and press ENTER .
4. A log-in page is displayed (web browser example shown below) where you enter a user
name and password to access the radio menu. Note that the default entries are made in
lower case (default username: admin; default password: admin). Passwords are case
sensitive. Do not use punctuation marks. You may use up to eight alphanumeric
characters.
5. Click OK. The radio responds with a startup menu as shown below. From here, you can
review basic information about the radio, or click on one of the menu items at the left side
of the page.