GE GFK-2489 - Manual (Page 108)

4-14 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489
4
256: 256 samples every 15616 hops
RSSIAVGTHRESH=—The hand-off threshold for RSSI
averaging (–120 dBm to –50 dBm).
HELP Lists commands supported for the current user log-in level.
LOG
Sets or displays the event log information, and displays the number of entries in
the event log. Optional arguments are used to clear or display the log.
Optional arguments:
CLEAR—Clear the event log
SHOW—Show the event log
TOTAL= —Number of event log entries in log. Read only.
CMD—Displays all settable optional arguments and their current values.
You can copy this list to a text file as a record of your configuration.
LOGIN This command is used for secure log-in to the radio. At the prompt, enter the
case-sensitive username and password. Each of these entries can be up to
eight characters long.
LOGOUT Logs the user out of the command interface.
MESSAGE Sets or displays the default packet priority.
Optional arguments:
LOW—Default priority setting is low.
NORMAL—Default priority setting is normal.
HIGH—Default priority setting is high.
CMD—Displays all settable optional arguments and their current values.
You can copy this list to a text file as a record of your configuration.
PASSWORD Sets the log-in password for the user at current access level or below.
Optional arguments:
—The log-in username to be associated with the password.
PROGRAM VERIFY Performs a checksum verification of one of the parameters listed below.
Do not enter PROGRAM alone, without the VERIFY= qualifier, unless instructed
by technical support personnel. Such an entry causes the radio to enter the
Bootloader mode, which, if improperly used, causes an undesired state in the
radio.