FUJITSU TeamPoS 3000 XL - Manual (Page 99)

TeamPoS 3000 XL and XL
2
Installation
D900000145 Issue 3 5-53
5.14.3 Dual Stacked LCD Stand
1. Remove only the hinge caps and cable
access cover from the stand; leave the
top and bottom hinge covers in place.
Some photos in this section show the
bottom hinge cover and top hinge cover
removed in order to more clearly show
the cable route; however, assembly is
easier if the bottom hinge cover and top
hinge cover are left in place. To
remove the hinge cap, grasp it firmly as
shown in the photo and pull back using your thumbs.
2. Remove the cable access cover by
pressing from the underside. The cable
access cover should pop out easily.
Cable Access
Cover
Top Hinge
Covers
Lower Hinge
Covers
Hinge Caps
Operator Facing
Display Mount
Customer Facing
Display Mount