4 powering off – FUJITSU TeamPoS 3000 XL User Manual
Page 133
TeamPoS 3000 XL and XL
2
General Operations
D900000145
Issue 3
6-4
6.1.4 Powering OFF
1.
Lift the plastic switch cover.
2.
Press the ON/OFF switch.
Note: Depending on BIOS setup, a momentary depression of the switch may
signal the application to shut the unit down, which could take a few
minutes. If power is not immediately turned off, either wait for the
application to shut the unit down, or keep the switch depressed for
approximately 4 seconds. For proper shutdown procedures, see the
application software documentation.
Note: Some peripherals, such as scanners and scales, may be separately
powered on.