Removing the motherboard assembly – FUJITSU TeamPoS 3000 XL User Manual
Page 50
TeamPoS 3000 XL and XL
2
Installation
D900000145
Issue 3
5-4
3.
To reinstall the rear panel, insert the metal tabs into the sides of the chassis and slide the
locking tabs down.
5.2
Removing the motherboard assembly
Caution: Be sure to observe all ESD precautions and power off procedures.
1.
Remove the back panel (See Section 5.1.2).
2.
Disconnect the AC power cord from the controller.
3.
Remove the front panel (See Section 5.1.1). The Yellow LED should be off. (See
Section 1.2).
4.
Remove hard disk drive shield by pushing in on the right side and pulling outward.