FUJITSU DL6600Pro - Manual (Page 67)

Continuous Forms
7-4 User’s Manual
Important:
To avoid paper feed problems, do not bind as shown in the figure.
Check that the height of unfolded pasted forms at perforations is 2 mm
(0.08 in) or less.
Single-sided zigzag spot gluing
and paper staples from back Combination of the other two
types of binding
Table 7–2 Binding for continuous forms with two to six parts (Continued)
Binding Remarks
76.2 mm (3 in) or less
25.4 mm (1 in) or less
Line pasting
Pasted
Stapling
Staple
2 mm (0.08 in)
or less
DL6400/6600 Book Page 4 Thursday, September 21, 2000 7:52 PM