FUJITSU DL6600Pro - Manual (Page 112)

Changing Print Adjustment Options
User’s Manual 8-31
SETUP MODE
2. Select ADJUST.
Repeatedly press LOCK to position the yellow arrow on the print
head beneath ADJUST. Press FONT or MENU to select ADJUST
and print the options.
3. Select an option from 1/6 IN to 66/6 IN.
Press LOCK to move the yellow arrow on the print head to the
appropriate option. Press FONT to select the option. The
item is then printed. If the top-of-form must be fine-
adjusted, do so now. Otherwise, go to step 4.
4. Exit ADJUST.
Press ONLINE to exit ADJUST and reprint the
<> menu.
5. Exit setup mode, saving the top-of-form setting.
Make sure that the yellow arrow is positioned beneath
SAVE&END. Then press FONT or MENU.
6. Check the top-of-form setting.
Load paper and print a sample page using software to check
adjustment. If necessary, reenter setup mode and fine-adjust the
top-of-form by changing the option.
1/6IN 2/6IN 3/6IN 4/6IN 5/6IN 6/6IN 7/6IN 8/6IN 9/6IN
10/6IN 11/6IN ....
DL6400/6600 Book Page 31 Thursday, September 21, 2000 7:52 PM