FUJITSU DL6600Pro - Manual (Page 234)

Messages
User’s Manual E-29
USING THE
LCD/LED TYPE
CONTROL PANEL
Warning error messages
LED model
A warning error message indicates an interface or data format error
while the printer is online. When this error occurs, the alarm buzzer
sounds but printing continues.
Table E–5 Warning errors list
No. Error name Error description Recovery method
1 Parity error An incorrect parity
condition is
detected in received
data at the
RS-232C interface.
• Besides parity,
this error may
also occur due to
incorrect setting.
• The printer
prints question
marks (?).
• Check the baud
rate and data
format.
• Check the interface
cable.
2 Framing
error An incorrect stop
bit condition is
detected in received
data at the
RS-232C interface.
• The printer
prints a question
mark (?) for the
first error byte
then ignores the
succeeding data.
• Check all settings
for the RS-232C
interface.
DL6400/6600 Book Page 29 Thursday, September 21, 2000 7:52 PM