FUJITSU DL6600Pro - Manual (Page 230)

Messages
User’s Manual E-25
USING THE
LCD/LED TYPE
CONTROL PANEL
Online setup mode This message appears when a
computer command places the
printer in setup mode. It is the
opening message of online setup
mode. Printer status information
appears in the lower line of the
display.
Page length = xx.x inch This message appears briefly when a
form feed is executed. It indicates
the length of paper moved per form
feed.
Paper still remains When unloading continuous forms,
paper was not retracted all the way
to the tractor. Tear off the
continuous forms.
Printing The printer is online and printing.
RESET: Are you sure?
No
Yes
The printer is ready to reset itself.
Press F3 to reset the printer. The
buffer is cleared.
Save top adjust now! This message briefly appears when
the adjusted top-of-form position is
permanently saved in the printer.
Line 001 is set at the current
position on the page.
Self-test printing
EXIT STOP GO The printer is printing or ready to
print its self-test pattern, used to
check print quality. Press F1 to exit
the self-test. Press F2 to pause
printing. Press F3 to start or restart
printing.
Setup values listing The printer is printing a page
listing its currently set default
values.
Table E–2 Printer status messages (Continued)
Message Meaning
DL6400/6600 Book Page 25 Thursday, September 21, 2000 7:52 PM