FUJITSU DL6600Pro User Manual
Page 52
Test Printing
User’s Manual
5-9
OPERATING
THE PRINTER
Notice:
Do not attempt to use the LF/FF (line feed/forms feed) button to eject
paper in test mode.
4. Check that the printed page resembles the sample in Figure 5-3.
Check that printing is uniform and free of light, dark, or smudged
areas. When printing quality is satisfactory, go to step 5. Otherwise,
correct problems as follows:
a. Check that the ribbon is installed correctly.
b. Check that the paper thickness lever is set to the appropriate po-
sition.
c. Put a new sheet in the cut-sheet tray. Then manually turn the
platen knob to advance the top edge of the paper past the top
roller.
d. Press FONT or MENU to restart printing. If printing quality
does not improve, turn off the printer and contact your dealer.
☞
DL6400/6600 Book Page 9 Thursday, September 21, 2000 7:52 PM