FUJITSU DL6600Pro - Manual (Page 100)

Changing MENU1 and MENU2 Options
User’s Manual 8-19
SETUP MODE
SET 1
SET 2 IBM character set 1
IBM character set 2
If a downloaded (soft) font is used, the character set for
that font overrides the setting.
*3
ITALIC
GRAPHIC Italic characters possible
Graphics characters (ruled lines) possible
*4
OFF
ON
Specifies that alternate graphics mode (AGM) is off.
The unit of line spacing is 1/72 or 1/216 of an inch.
Specifies that alternate graphics mode (AGM) is on.
The unit of line spacing is 1/60 or 1/180 of an inch.
SKIP
NO-SKIP
For continuous forms, specifies whether an inch is
skipped over the perforation. If not using software to
specify a bottom margin, select SKIP when using thick
multipart forms.
One inch is skipped over the perforation.
The perforation is not skipped. Printing continues in
the bottom margin of the page.
13.6 IN
11.4 IN
11.0 IN
8.0 IN 13.6-inch page width
11.4-inch page width
11-inch page width
8-inch page width
*2
NO-SLSH
SLASH
Specifies whether the number zero is printed with a
slash. The slash is useful for distinguishing the capital
letter “O” from the number “0.”
This setting is invalid for some software fonts.
0
Ø
Table 8–3 MENU1 and MENU2 options (Continued)
MENU 1 or MENU2
item Options Description
DL6400/6600 Book Page 19 Thursday, September 21, 2000 7:52 PM