Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 78)

VSM-4x4A – Technical Specifications 71
9 Technical Specifications
Inputs 4 HDMI connectors (HDMI, HDCP version 1.1)
Outputs 4 HDMI connectors (HDMI, HDCP version 1.1)
4 balanced stereo audio on terminal block connectors
4 unbalanced audio on 3.5mm mini jacks
Output Resolutions NATIVE, 480p, 576p, 720p50, 720p59, 720p60, 1080p24,
1080p50, 1080p60, 1024x768, 1280x800, 1280x1024,
1366x768, 1440x900, 1600x900, 1680x1050 or 1920x1200
Video Latency Progressive input: 30ms (typical)
Controls Front panel buttons, IR with customized remote control, RS-
232, Ethernet with built-in Web pages, USB port for
programming
Power Source 100-240V AC, 29VA max.
Regulatory Compliance Safety: CE, UL, FCC
Environmental: RoHS, WEEE
Operating Temperature 0° to +40°C (32° to 104°F)
Storage Temperature -40° to +70°C (-40° to 158°F)
Humidity 10% to 90%, RHL non-condensing
Net Dimensions 19" x 7" x 1U (W, D, H) rack mountable
Shipping Dimensions 52.5cm x 33cm x 10.7cm (20.7" x 13" x 4.2" ) W, D, H
Net Weight 1.8kg (4lbs) approx.
Shipping Weight 2.7kg (6lbs) approx.
Included Accessories Power cord, rack ears, IR remote control
Specifications are subject to change without notice at www.kramerav.com
9.1 Default Communication Parameters
RS-232
Baud Rate: 115,200 Stop Bits: 1
Data Bits: 8 Parity: None
Ethernet
To reset the IP settings to the factory reset values go to : Menu-> Factory-> RESET-
>Change the option to YES and press Enter
IP Address: 192.168.1.39 Default TCP Port #: 5000
Subnet Mask: 255.255.255.0 Maximum TCP
Ports: 4
Default Gateway: 192.168.1.254 Default UDP Port #: 50000
Maximum UDP
Ports: 4
Full Factory Reset
OSD Go to : Menu-> FACTORY DEFAULT -> Change the option to YES
and press Enter
P3000 Use “FACTORY” command