Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 109)

102 VSM-4x4A – VSM-4x4A RS-232/Ethernet Communication Protocol
Set the bezel to on and to 3:
“#B EZEL 1,0,1,3,3 ”,0x0D
10.3.8.2 EDID-AUDIO
Functions Permission Transparency
Set:
EDID-AUDIO
End User Public
Get: EDID-AUDIO? End User Public
Description Syntax
Set: Set EDID audio mode # EDID-AUDIO SPmodeCR
Get: Get EDID audio mode # EDID-AUDIO? SP
Response
Set / Get: ~ nn@ EDID-AUDIO SPmodeCR LF
Parameters
mode – 0 (LPCM 2CH), 1 (LPCM 6CH), 2 (LPCM 8CH), 3 (BITSTREAM), 4 (HD), 5 (DISABLE)
K-Config Example
Set audio EDID mode to HD:
“# EDID-AUDIO 4 ”,0x0D
10.3.8.3 IDV
Functions Permission Transparency
Set: IDV End User Public
Get:
Description Syntax
Set: Set visual indication from the device # IDV CR
Get:
Response
~ nn@ IDV SPOKCR LF
Notes
Using this command, some devices can light a sequence of buttons or LEDs to allow identification of a
specific device from similar devices
K-Config Example
Set audio visual indication from the device:
“# IDV ”,0x0D