1 bezel correction, 2 crop and position the image, Figure 25: the video wall tab – Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler User Manual
Page 57: Bezel correction, Figure 26: the video wall tab, Crop/position correction
50
VSM-4x4A
–
Using the Embedded Web Pages
The video wall tab displays four outputs in a video wall display (2x2 or 1x4,
selectable). Click one of the four input buttons to switch an input to the video wall.
You can edit the input label (see
Section 8.2.5.1
), store and recall a video wall
configuration (see
Section 8.2.5
) and set the output resolution.
8.2.2.1
Bezel Correction
Set the horizontal and vertical bezel correction (see
Section 5.2
) via the Video Wall
tab:
Figure 25: The Video Wall Tab
– Bezel Correction
8.2.2.2
Crop and Position the Image
Crop and/or position the image on the 1x4 video wall (see
Section 5.2
) via the
Video Wall tab:
Figure 26: The Video Wall Tab
– Crop/Position Correction