Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 33)

26 VSM-4x4A – Controlling the VSM-4x4A
The default timeout is set to 10 seconds
•
ENTER to accept changes and to change the menu settings
•
Arrow buttons to move through the OSD menu, which is displayed on the
video output
In the OSD menu, select EXIT to exit the menu.
6.2.1 Configuring the Operation Mode (MODE Menu)
Mode Function
SEAMLESS
MATRIX Select the 4x4 matrix switcher mode – the same output resolution is
set for all the outputs
INDEPENDENT
MATRIX Select the 4x4 matrix switcher mode – each output resolution is set
independently
VIDEO WALL
2x2 Select the 2x2 video wall mode
VIDEO WALL
1x4 Select the 1x4 video wall mode
1x4 means 1 column x 4 rows. Note that you cannot
rotate the image by 90

. The source should be pan and
scan so as to get the correct aspect ratio
DUAL - POP Select the 4x2 dual POP operation mode: both A outputs display two
selected inputs that appear as side by side images identically. In the
same way both B outputs display two selected inputs that appear as
side by side images identically
DUAL - PIP Select the 4x2 dual PIP operation mode: both A outputs display two
selected inputs that appear as one PIP image over a main screen
image, identically. In the same way, both B outputs display two
selected inputs that appear as one PIP image over a main screen
image, identically
QUAD Select the QUAD operation mode: All four outputs show all the four
input images each of which appears on one quarter of the screen