Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 16)

VSM-4x4A – Connecting and Operating the VSM-4x4A 9
5 Connecting and Operating the VSM-4x4A
The VSM-4x4A is a four-in-one box device. It can operate as a:
•
Matrix switcher
•
Video wall
•
Dual switcher
•
Quad switcher
You can select the different operation modes via front panel buttons, the IR remote
control transmitter and OSD menu or via the Web pages.
This section describes how to connect and operate the VSM-4x4A in each of the
four operation modes.
Always switch off the power to each device before connecting it to
your
VSM-4x4A . After connecting your VSM-4x4A , connect its power
and then switch on the power to each device.
This section describes selecting inputs via the front panel buttons.
To select the inputs via the OSD, use the SOURCE menu item (see
Section 6.2.1 ).
To select the inputs via the IR remote control transmitter, see
Section 6.6 .
You do not have to connect all the inputs and outputs, connect only
those that are required.