Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler User Manual
Page 28

VSM-4x4A
–
Controlling the VSM-4x4A
21
Matrix Mode
To switch an input to an output in Matrix mode:
1. Press the required OUTPUT/WINDOW button (A to D).
The selected button illuminates.
2. Press an INPUT button (1 to 4) to select the input to switch to the output.
You can also switch several inputs and outputs using the TAKE button (see
Section 6.1.2
Video Wall Mode (2x2 or 1x4)
To switch an input to the output, press an INPUT button (1 to 4). The selected
image appears on the video wall.
The audio input signal is routed to one of the four displays.
Dual Mode
POP Mode
: select the inputs to switch to the LEFT and RIGHT images for each of
the two dual groups (two A outputs and two B outputs).
PIP Mode
: select the INPUT buttons (1 to 4) to switch to the MAIN and PIP images
for each of the two dual groups (two A outputs and two B outputs).
To select the images for group A (POP/PIP) using the front panel buttons:
1. Press OUTPUT A or OUTPUT B.
The selected button illuminates.
2. Press an INPUT button (from 1 to 4) to select the left/main image on the
output.
3. Press an INPUT button (from 1 to 4) to select the right/PIP image on the
output.